SPECIFICATIONS

EXPAND ALL COLLAPSE ALL

  • Engine

    Model Komatsu SAA6D107E-3
    Type Water-cooled, 4-cycle
    Aspiration Turbocharged, aftercooled
    Number of Cylinders 6
    Bore x Stroke 107 mm x 124 mm
    Piston Displacement 6.69 ltr
    Horsepower, Gross - SAE J1995 123 kW / 165 HP
    Horsepower, Net - ISO 9249 / SAE J1349 123 kW / 165 HP
    Rated RPM 2000
    Emissions certification EPA Tier 4

  • Hydraulic System

    Type Closed-centre system with load sensing
    Main pump type Variable capacity piston type
    Pump for Boom, arm, bucket, swing, and travel circuits
    Maximum flow 490 ltr/min
    Hydraulic Motors  
    Travel 2 x axial piston motor with parking brake
    Swing 1 x axial piston motor with swing holding brake
    Relief Valve Setting  
    Implement circuits 380 kgf/cm3
    Travel circuit 380 kgf/cm3
    Swing circuit 299 kgf/cm3
    Pilot circuit 33 kgf/cm3
    Hydraulic Cylinders Bore x Stroke x Rod diameter
    Boom 2-130 mm x 1385 mm x 90 mm
    Arm 1-135 mm x 1490 mm x 95 mm
    Bucket 1-115 mm x 1120 mm x 80 mm

     

  • Drives and Brakes

    Steering control Two levers with pedals
    Drive method Fully hydrostatic
    Maximum drawbar pull 202 kN 20600 kgf
    Gradeability 70 %
    Travel speeds 3.0 / 5.5 km/h
    Service brake Hydraulic lock
    Parking brake Mechanical disc brake

  • Swing System

    Driven by Hydraulic motor
    Swing reduction Planetary gear
    Swing circle lubrication Grease-bathed
    Swing lock Mechanical disc brake
    Swing speed 11.0 rpm

  • Undercarriage

    Center frame X-frame leg
    Track frame Box-section
    Track type Sealed track
    Track adjuster Hydraulic
    Number of shoes (each side) 49
    Number of carrier rollers (each side) 2
    Number of track rollers (each side) 9
    Shoe size & type 600 mm triple grouser

  • Coolant & Lubricant capacity

    Fuel tank 290 ltr
    Coolant 28.3 ltr
    Engine 23.1 ltr
    Final drive, each side 5.0 ltr
    Swing drive 6.5 ltr
    Hydraulic tank 126 ltr
    DEF tank 13 ltr

  • Weights

    Operating weight  
    PC228US-11 23,520 - 24,300 kg
    PC228USLC-11 23,890 - 24,670 kg

  • Dimensions (transport position)

      PC228US-11 PC228USLC-11
    Length, overall (mm) 8830 8920
    Track length on ground (mm) 3460 3655
    Track gauge (mm) 2380 2380
    Overall track width (mm) 2980 2980
    Overall height (mm) 3080 3080
    Ground clearance (mm) 440 440

  • Operation

    Boom size (m) & type 5.7 standard
    Arm size (m) & type 2.9 standard
    Arm crowd force - ISO (kgf) 11000
    Bucket crowd force - ISO (kgf) 15200
    Digging depth - maximum (mm) 6620
    Digging reach - maximum (mm) 9875
    Maximum reach @ ground level 9700
    Swing radius (mm) 2310

PC228USLC-11 Excavators

When you need big-machine productivity and plenty of excavating power in confined spaces or busy urban areas, our PC228US-11 excavator – now powered by a Komatsu new technology engine – is an ideal solution. As with all our construction excavators, key components are designed and manufactured by Komatsu to work together in an integrated package. And it comes standard with our Komtrax remote monitoring and location system, backed by our Australia-wide service and support network.

Tier 4 Engine KDPF Regeneration
  • 123 kW / 165 HP
    ENGINE POWER
  • 24,120 kg
    OPERATING WEIGHT
  • 0.97 m³
    BUCKET CAPACITY

PC228USLC-11 Excavators

Current Offers

Short Tail Swing Radius

The PC228US/LC-11 is an ideal machine for applications such as road work, underground utilities or other applications where a conventional excavator will not fit. The contoured cab design and convex sliding door allow the cab to swing within the same radius as the counterweight. Trucks can be positioned closer to the machine when working within one lane of traffic, improving operator confidence and job efficiency.

Fuel consumption reduced

The PC228US/LC-11's new tier 4 final engine along with enhancements in the hydraulic system considerably decreases fuel consumption. Fuel consumption reduced by 4% compared to the older model.

Low vibration with Viscous cab mounts

The PC228US/LC-11 uses viscous mounts for the cab that incorporate a longer stroke and the addition of a spring.
The cab damper mounting combined with a high rigidity deck reduces vibration at the operator’s seat.

Take the next steps

CONTACT US

SIGN UP TO OFFERS & NEWS

FIND US
Cookies are small text files created by a web browser when a user visits a website. Cookies are stored on your device. Some cookies are only stored for the duration of your site visit whilst others are stored for longer periods of time. The information stored in a cookie is transferred between a website and the browser to provide enhanced functionality and improve the user experience when using the website. Komatsu may collect certain information such as browser type and operating system through the use of cookies to improve your experience. You acknowledge this by using our website