SPECIFICATIONS

Engine

Model	Komatsu SAA6D107E-1
Type	Four-cycle, water-cooled, direct injection
Aspiration	Turbo-charged, after-cooled
Number of cylinders	6
Bore x stroke	107 mm x 124 mm
Displacement	6.69 ltr
Horsepower, Gross - SAE J1995	104 kW / 140 HP
Horsepower, Net - ISO 9249 / SAE J1349	103 kW / 138 HP
Rated RPM	2000
Fan drive method	Hydraulic
Emissions certification	EPA Tier 3

Operation / Application

Standard bucket capacity SAE	2.3 m³
Bucket description	Stockpile bucket, pin on
Bucket width	2550 mm
Dump clearance at 45° dump angle	2945 mm
Dump reach at 45° dump angle	945 mm
Static tipping load, straight	9340 kg
Static tipping load, full turn	8170 kg
Breakout force	131 kN 13380 kgf

Axles and Final Drives

Drive system	Four-wheel drive
Front	Fixed, semi-floating
Rear	Centre-pin support, semi-floating, 24° total oscillation
Reduction gear	Spiral bevel gear
Differential gear	Torque proportioning
Final reduction gear	Planetary gear, single reduction

Brakes

Service brakes	Hydraulically actuated, wet disc brakes actuate on four wheels
Parking brake	Wet, multi-disc brake on transfer output shaft
Secondary brake	Parking brake is commonly used

Hydraulic System

Steering System:

Hydraulic pump	Gear type pump
Capacity (at rated rpm)	110 ltr/min
Relief valve setting	18.6 MPa 190 kgf/cm²
Hydraulic Cylinders:
Type	Double-acting, piston type
Number of cylinders	2
Bore x stroke	70 mm x 453 mm

Loader Control:

Hydraulic pump	Gear type pump
Capacity	78 ltr/min
Relief valve setting	20.6 MPa 210 kgf/cm²
Hydraulic Cylinders:
Type	Double-acting, piston type
Number of boom cylinders	2
Boom cylinder, bore x stroke	130 mm x 717 mm
Number of bucket cylinders	1
Bucket cylinder, bore x stroke	170 mm x 480 mm
Control valve	3-spool type
Control Positions:
Boom	Raise, hold, lower, and float
Bucket	Tilt-back, hold, and dump
Hydraulic Cycle Time: (rated load in bucket)
Raise	5.7 sec
Dump	1.6 sec
Lower (empty)	3.3 sec

Service Refill Capacities

Cooling system	22 ltr
Fuel tank	186 ltr
Engine	23 ltr
Hydraulic system	67 ltr
Axle front	18 ltr
Axle rear	18 ltr
Transfer case	5 ltr

Steering System

Type	Articulated type, fully hydraulic power steering
Steering angle	38° each direction (40° to max end stop)
Minimum turning radius at centre of outside tyre	5175 mm

Transmission

Transmission	Hydrostatic, 1 pump, 2 motors with speed range select
Travel speed	Forward & Reverse
1st	4.0 - 13.0 km/h
2nd	13.0 km/h
3rd	18.0 km/h
4th	38.0 km/h
Measured with 20.5-25 tyres

Tyres

Standard tyres 20.5-25-16PR, L2 tubeless
Weights

Operating weight 11,950 - 12,690 kg

Rental rate for WA250PZ-6

Start Date *

Start Time *

End Date *

End Time *

Total $-

Enquire To Hire

Enquire to buy

WA250PZ-6 Wheel Loaders

Komatsu Rental’s WA250PZ-6 offers bucket capacities from 1.9-2.7 cu m, hydrostatic drive and our PZ parallel-lift arm system and hydrostatic drive, so you can hire a loader with maximum versatility and productivity across all loading, handling and lifting applications. As with all our wheel loaders, key components are designed and manufactured by Komatsu to work together in an integrated package. Rent with confidence with our KOMTRAX remote monitoring and location system, backed by our Australia-wide service and support network.

103 kW / 138 HP
ENGINE POWER
11,950 kg
OPERATING WEIGHT
2.3 m³
BUCKET CAPACITY

Please contact your nearest location for availability

View more locations

Standard Set of Attachments

Loader Bucket

Coupler

If you want to learn more contact us at 1300 566 287 or enquire today.