SPECIFICATIONS

Engine

Model	Komatsu SAA6D107E-2
Type	Water-cooled, 4-cycle, direct injection
Aspiration	Turbocharged, aftercooled, cooled EGR
Number of Cylinders	6
Bore x Stroke	107 mm x 124 mm
Piston Displacement	6.69 ltr
Horsepower, Gross - SAE J1995	123 kW / 165 HP
Horsepower, Net - ISO 9249 / SAE J1349	118 kW / 158 HP
Rated RPM	2000
Fan drive method	Mechanical
Emissions certification	EPA Tier 4 interim

Hydraulic System

Type	HydrauMind System
Number of selectable working modes	6
Main pump type	Variable displacement piston type
Pump for	Boom, arm, bucket, swing, and travel circuits
Maximum flow	475 ltr/min
Hydraulic Motors
Travel	2 x axial piston motor with parking brake
Swing	1 x axial piston motor with swing holding brake
Relief Valve Setting
Implement circuits	380 kgf/cm³
Travel circuit	380 kgf/cm³
Swing circuit	295 kgf/cm³
Pilot circuit	33 kgf/cm³
Hydraulic Cylinders	Bore x Stroke x Rod diameter
Boom	2-130 mm x 1334 mm x 90 mm
Arm	1-135 mm x 1490 mm x 95 mm
Bucket	1-115 mm x 1120 mm x 80 mm

Drives and Brakes

Steering control	Two levers with pedals
Drive method	Fully hydrostatic
Maximum drawbar pull	202 kN 20570 kgf
Gradeability	70 %
Travel speeds	3.0 / 5.5 km/h
Service brake	Hydraulic lock
Parking brake	Mechanical disc brake

Swing System

Driven by	Hydrostatic
Swing reduction	Planetary gear
Swing circle lubrication	Grease-bathed
Service brake	Hydraulic lock
Swing lock	Mechanical disc brake
Swing speed	12.4 rpm

Undercarriage

Center frame	X-frame leg
Track frame	Box-section
Track type	Sealed track
Track adjuster	Hydraulic
Number of shoes (each side)	49
Number of carrier rollers (each side)	2
Number of track rollers (each side)	9
Shoe size & type	600 mm triple grouser

Coolant & Lubricant capacity

Fuel tank	400 ltr
Coolant	30.7 ltr
Engine	23.1 ltr
Final drive, each side	5.0 ltr
Swing drive	6.5 ltr
Hydraulic tank	135 ltr
DEF tank	None

Weights

Operating weight 23,330 kg

Dimensions (transport position)

Length, overall (mm)	9625
Track length on ground (mm)	3655
Track gauge (mm)	2380
Overall track width (mm)	2980
Overall height (mm)	3045
Ground clearance (mm)	440

Operation

Boom size (m) & type	5.70 standard
Arm size (m) & type	2.9 standard
Arm crowd force - ISO (kgf)	11000
Bucket crowd force - ISO (kgf)	15200
Digging depth - maximum (mm)	6620
Digging reach - maximum (mm)	9875
Maximum reach @ ground level	9700
Swing radius (mm)	2940

Rental rate for PC210LCi-10

Start Date *

Start Time *

End Date *

End Time *

Total $-

Enquire To Hire

Enquire to buy

PC210LCi-10 Excavators

Now you can rent the world’s first intelligent Machine Control (iMC) excavator. Komatsu’s 23.3 tonne PC210LCi-10 features a revolutionary and fully factory-integrated 3D GNSS machine control and guidance system, and is available for hire through Komatsu Rental. Operators can focus on moving material efficiently, without worrying about over- or under-digging, giving up to a 60% improvement in work efficiency. Rent with confidence with our KOMTRAX remote monitoring and location system, backed by our Australia-wide service and support network.